NEXEDGE NX-420K3 800 MHz Digital and FM Portable Two-Way Radio

NEXEDGE NX-420K3 800 MHz Digital and FM Portable Two-Way Radio
Price: Request Quote
Type:Digital Capable Portables
Brand:Kenwood
Model: NX-420K3
Features:
  • 806 - 870 MHz (1W/3W)
  • 260 CH-GID / 128 Zones (LCD Model)
  • 64 CH-GID / 4 Zones (Non LCD Model)
  • 12-Key Keypad Model
  • 8 Character Alphanumeric Aliases
  • Function / Status LCD Icons
  • Transmit / Busy / Call Alert / Warn LED
  • On / Off Volume Knob
  • 16-Position Selector
  • 4 Front PF Keys
  • 2 Side PF Keys
  • Emergency / AUX Key
  • Built-in Motion Sensor
  • 500 mW Speaker Audio
  • Zone / CH Number Voice Announcement
  • KMC-48GPS Speaker Mic Option
  • KPG-141D Windows FPU
  • Flash Firmware Upgrading
  • MIL-STD-810 C/D/E/F/G
  • IP54/55 Dust & Water Intrusion
  • PC Serial Interface
  • SDM Manual Input*1
  • Transparent Data Mode*1
  • *1 Requires compatible software application (e.g. KAS-10) or console hardware.

Digital - General

  • NXDN Digital Air Interface
  • AMBE+2 VOCODER
  • 6.25 & 12.5 kHz Channels
  • Over-the-Air Alias
  • Over-the-Air Programming
  • Paging Call
  • Emergency Call
  • All Group Call
  • Status Messaging*1 *2
  • Remote Stun / Kill*1
  • Remote Check*1
  • Short & Long Data Messages*1
  • GPS Location with Voice*1
  • NXDN Scrambler Included

Digital - Conventional Mode

  • 64 Radio Access Numbers (RAN)
  • Individual & Group Selective Call*3
  • Mixed FM / Digital Operation
  • Conventional IP Networks
  • Site Roaming

Digital - Trunking Mode

  • Individual Private Call
  • Group Call & Broadcast Call
  • Telephone Interconnect
  • Transmission Trunked Mode*4
  • Message Trunked Mode*4
  • Call Queuing with Priority*4
  • Late Entry (UID & GID)*4
  • 4 Priority Monitor ID’s*4
  • Remote Re-Grouping*1
  • Failsoft Mode

Multi-Site IP Network Compatible

  • 60,000 GIDs / UIDs
  • Wide Area Group Call
  • Auto Roaming Registration
  • Group Registration

Scan

  • Single Zone / Multi-Zone / List Scan
  • Single Priority Scan (Conventional)

FM Modes - General

  • 25 & 12.5 kHz Channels
  • NPSPAC Channels
  • Conventional & LTR Zones
  • FleetSync / II, MDC-1200, DTMF*3
  • QT / DQT (Conventional Zones only)*3
  • Voice Inversion Scrambler (16 Codes)

FleetSync / II (FM)

  • PTT ID ANI / Caller ID*3
  • Selective /Group Call*3
  • Emergency, Status & Text Messages*1

MDC-1200

  • PTT ID ANI / Caller ID*3
  • Emergency, Radio Check & Inhibit
  • *1 Requires compatible software application (e.g. KAS-10) or console hardware.
  • *2 Non LCD Model -Pre-programmed key operation
  • *3 Non LCD Model -Some screen / key-based functions are not available.
  • *4 These trunked features are primarily system programming and operational dependent. Priority Monitor also requires NX subscriber settings.
 

Contact Us

= Required