KENWOOD NX-5600H

KENWOOD

NX-5600H

The KENWOOD NX-5600H digital mobile radio deck operates across more than one mode, including NXDN, P25 and analog FM. They are also available with dual remote-control head and multi-band (multi RF deck) control options, making these highly advanced radios ideal for mission-critical users.

Frequency Band:
Low Band

Frequency Range:
39-50 MHz

Power Output:
110W

Number of Channels/Groups/Zones:
1024 Channels / 128 Zones

Channel spacing:
12.5 / 15 / 25 / 30 kHz, 12.5 / 25 kHz Analog
6.25 / 12.5 kHz Digital

Dimensions W x H x D
N/A

Weight (with standard battery)
N/A

Keypad / Keys
No Keypad

Display
No Display

Operating temperature
-22°F to +140°F

Mil spec
MIL-STD-810 C/D/E/F/G

IP Standards
IP54/55

  • Multi-Digital Operation in NXDN/P25
  • Support NX-5000 Remote Control Head Options
  • Multi-RF Deck Configuration Available (Lovband, VHF, 380-470, 450-520, 7&800)
  • Built-in Micro USB A-B Interface
  • Horn Alert / Public Address
  • Built-in GPS Receiver
  • Built-in Bluetooth® Module
  • Built-in 56-bit DES Encryption (4 keys programmable by KPG-D1N)
  • Optional 256-bit AES Encryption
  • 12 Watt Audio Output
  • DB-25 & Molex 9-pin Accessory Connector
  • Active Noise Reduction (ANR)
  • KPG-D1N Windows® FPU
  • Flash Firmware Upgrading
KCT-23M2

KCT-23M2

DC Cable (75/110W Dash mount)

KCT-23M4

KCT-23M4

DC Cable (75/110W Remote mount)

KCT-71A100

KCT-71A100

KCT-71A Extended Control Head Cable (up to 100 ft. max.)
Note: Please specify exact length at 1ft. increments when ordering. Caution: Extended control head cables exhibit a loss in speaker audio power to the control heads.

KCT-71A50

KCT-71A50

KCT-71A Extended Control Head Cable (up to 50 ft. max.)
Note: Please specify exact length at 1ft. increments when ordering. Caution: Extended control head cables exhibit a loss in speaker audio power to the control heads.

KCT-71M2

KCT-71M2

Remote Control Cable (17 feet)

KCT-71M3

KCT-71M3

Remote Control Cable (25 feet)

KCT-71M4

KCT-71M4

Remote Control Cable (1.6 feet)

No Image Available

KCT-77M2

Remote Control Cable for KCH-21RM (17 feet)

No Image Available

KCT-90USB

USB Mobile Cable for SD Card Direct Access Support
Note: microSD function requires KWD-5002SD license.

No Image Available

KCT-91MRS

DB25 Cable for Mobile Relay Station (Conventional Only)
Note: - Mobile Relay Station requires Multi RF Deck Configuration. The cable requires between Decks.- Built-in GPS and Bluetooth are not available with Mobile Relay Station.

KMC-59

KMC-59C

Control Station Desktop Microphone (8-pin mod. plug)
Note: Compatible with FDMA (analog) and TDMA operations.

KMC-9

KMC-9C

Control Station Desktop Microphone (8-pin mod. plug)

KCT-73

KCT-73MIC

External Microphone kit w/9.8 ft. cord for Safer Driving

KCT-74

KCT-74PTT

External PTT Switch kit w/9.8 ft cord for Safer Driving

KES-5

KES-5

External speaker, 40W max input
Note: requires KCT-60M installed.

KMC-35

KMC-35

MIL-SPEC Standard electret mobile microphone (8-pin mod. plug) - same as supplied

KMC-36

KMC-36

MIL-SPEC Standard electret mobile microphone with 12-key DTMF (8-pin mod. plug)

KCT-72

KCT-72

External Accessory Connection Cable for KRK-18HM

KLF-2

KLF-2

Line Filter (suppresses alternator whine, 25dB, 25A max).

No Image Available

KMB-36

Mounting Bracket for NX-5000 High Power RF Deck

No Image Available

KRA-40GM

GPS Antenna

No Image Available

KCH-19M

Basic Control Panel

No Image Available

KCH-20RM

Full Featured Remote Control Panel. No Internal Speaker included. KES-5/3 is required.

No Image Available

KCH-21RM

Hand Held Control Head for Long Cable
*Requires KCT-77M2 (17 ft.)

No Image Available

KCH-21RM-S

Hand Held Control Head with Short Cable (4 ft.)

No Image Available

KRK-14HM

Control Head Interface Kit for KCH-19M

  • NX-5600HBF3 (110W, 39-50 MHz) RF Deck Only, Analog & NXDN Conv
    (Remote Control Head, Microphone, Bracket, DC Cable not included)